Gasser HotRod Forums banner

1 - 7 of 7 Posts

·
Adminstrator And Sheet Metal Junkie
Joined
·
3,068 Posts
Discussion Starter · #3 ·
Thanks RL
Had a few minutes left over after I did some plowing to kick back the banks for the next storm were getting Tuesday. So I took a break and switched my wheels over to the flat bed truck seeing as my 70 C10 is getting a five lug swap with rallies.

 

·
Registered
Joined
·
33 Posts
These old trucks are fun. I took a 72 longbed frame,cut 20 inches off frame under the cab and took 8 inches off end of frame rails (rear). Using a 72 cab. Didn't like the 67 small window ,and I am using the 67 stepside bed,also cut to shortie and the 67 front. I finished the paint and body work but have other projects to finish. Kinda frustrating to walk around the truck in my shop. All it needs is to be re-assembled but I have a Camaro and another truck(72) that I have to finish first.
Are ya gonna build a flatbed or mount a fleet/stepper ?
That must be a 68 with the marker lights.-Keith
 

·
Adminstrator And Sheet Metal Junkie
Joined
·
3,068 Posts
Discussion Starter · #5 ·
Plans are Keith, to build a flat bed and use is in place of my Dodge CTD so I keep the miles down on it. It will make a nice shop truck for local parts chasing. and running motors back and forth to the machine shop. and an early morning coffee runner. :D
 

·
Registered
Joined
·
107 Posts
looks like a fun truck to me. enjoy it steve.
 

·
Registered
Joined
·
2,322 Posts
Great shop truck. Keep the pics coming as you go. Mark L
 
1 - 7 of 7 Posts
Top