Joined
·
1,608 Posts
I know that your car is on the rotisserie, but can you attach the fenders to set some tires on milk crates to see how they fit in the wells? Measure wheel back to wheel back and order the closest one. Sounds like you may have answered your own question and you should get the 48" unit.
I did some searching and it looks like the original hub to hub is 54" but everything else shows track width at 55". Not sure why there would be a difference there. Either way it looks like you are going to add and inch and a half or more so you'll have to be careful about wheel offset and width.
Mike
I did some searching and it looks like the original hub to hub is 54" but everything else shows track width at 55". Not sure why there would be a difference there. Either way it looks like you are going to add and inch and a half or more so you'll have to be careful about wheel offset and width.
Mike