Gasser HotRod Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
103 Posts
Discussion Starter · #1 ·
Before I cut the old engine crossmember out should I tack weld a piece of angle iron across the frame rails to make sure nothin moves....it still has the front crossmember for front radiator / body support.
 

·
Registered
Joined
·
103 Posts
Discussion Starter · #3 ·
Yeah I went ahead and put the brace in... took about 5min, better safe than sorry.
 
1 - 3 of 3 Posts
Top