Gasser HotRod Forums banner

Need help getting started

15K views 2 replies 3 participants last post by  Geerbangr 
#1 · (Edited)
I am 18, i have a 1991 ford ranger with the 2.3.
And i want to turn it into a gasser.
I want to keep the original drivetrain, but i want
to give it that gasser stance, straight axle, etc.
pretty much just make it look/sound cool... like a gasser.

I need help getting stared. i already have some ideas, but
what do i do about the front end? suspension? Body?

I am also working with a budget of about $1000
 
#2 ·
Welcome to the site. Can you give us a little background on your experience level so we know what to address. I think you can make it under budget if you are just going to do the front axle. But you are going to have to do a junk yard crawl. Lots of info on the suspension thread. Can you weld, do you own wrench work, etc. Let us know what you need and we will try and help.
 
#3 ·
Young fella, a 1000 budget isn't going to carry you very far in your build. Like Mike asked, can you weld and do you have a machine or do you have to farm your work out. Where are you located ? May find a couple board members close to you willing to help you out.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top