Gasser HotRod Forums banner

battery cables

2K views 1 reply 2 participants last post by  tlap 
#1 ·
i've noticed a lot of pics on routing battery cables through bulkheads . while grommets look nice they offer very little protection . cut a grommet in half and look at the pass through protection . very thin and soft rubber easily cut by the sheet metal due to vibration . i use a short piece of heater or a/c hose for protecting cables . i learned the hard way many years ago on a race car .
just food for thought and worth just what you paid for it . :)
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top